tom780
Posts: 12
Joined: 11 Jan 2019, 13:47

Fatal Fury 3 dont start

14 Jan 2019, 16:57

Hi everyone,
I'm trying the various games, everyone seems to be fine.
Fatal fury 3 does not start, it loads the neo geo logo continuously and does not start.
How can I solve?

tom780
Posts: 12
Joined: 11 Jan 2019, 13:47

Re: Fatal Fury 3 dont start

21 Jan 2019, 12:29

My set up is:
MVS1FZ
unibios4.0

User avatar
neodev
Posts: 225
Joined: 09 Apr 2018, 14:47

Re: Fatal Fury 3 dont start

21 Jan 2019, 21:29

Is that the only non working game?
Please, run your neo files through neovalidator tool to ensure the roms are ok and supported.

tom780
Posts: 12
Joined: 11 Jan 2019, 13:47

Re: Fatal Fury 3 dont start

21 Jan 2019, 22:51

The rom is ok,validation is ok.

All games work except fatal fury 3, which hangs in the neo geo logo screen.

tom780
Posts: 12
Joined: 11 Jan 2019, 13:47

Re: Fatal Fury 3 dont start

22 Jan 2019, 23:03

My firmware is 1.06 R10.

User avatar
neodev
Posts: 225
Joined: 09 Apr 2018, 14:47

Re: Fatal Fury 3 dont start

23 Jan 2019, 00:06

Threre are some test we can make to narrow the cause of the resets.

First, let's try with clean backup ram. To do so, ooen the SD card in a PC, and in the BUP folder, delete any file starting with Fatfury3. Then indertnig back into the neosd, but before turning your mvs on, place.all the 8 dipswitches of the mvs board in the On position. Then turn it on. It should boot to a screen saying work ram test. Turn it off, and restore the dips to the original position (usually all off) and try fatfury3 again.

If it doesn't work, go to neosd ootions menu, and enable arcade mode, flash fatfury3 and turn your board off. Remove the sd card from the neosd and turn it on again and check if it doesn't reset.

tom780
Posts: 12
Joined: 11 Jan 2019, 13:47

Re: Fatal Fury 3 dont start

24 Jan 2019, 14:31

I tried to start the game in arcade mode, without the sd, it gives me this error.


https://imgur.com/a/0hGOFAq

Return to “NEOSD and NEOSD Pro MVS Tech Support”