basitsch
Posts: 2
Joined: 24 Sep 2018, 15:46

NeoSD MVS - only Crosshatch-Screen

24 Sep 2018, 17:03

Hello!
My NeoSD MVS arrived today and unfortunately causes problems.
I unpacked the module, formatted an 8GB microSD on FAT32 and converted a ROM via NeoBuilderUI_1.06. Then I put the module into my MVS-1c ( https://de.aliexpress.com/item/NEUE-JAM ... 52119.html ) and turned it on. Unfortunately I only see the Crosshatch test screen, with or without sd card inserted.

User avatar
neodev
Posts: 446
Joined: 09 Apr 2018, 14:47

Re: NeoSD MVS - only Crosshatch-Screen

24 Sep 2018, 17:34

Probably the cart is plugged backwards. On a mv-1c, ensure the neosd sticker is facing away from the jamma connector. That is, as if the side without sticker had the usual mvs cartridge arrow (that must be matched with the mvs arrow for insertion.

basitsch
Posts: 2
Joined: 24 Sep 2018, 15:46

Re: NeoSD MVS - only Crosshatch-Screen

24 Sep 2018, 18:27

Thanks, that's it.
I was a bit confused because the module doesn't have this arrow. I had searched for it, found none and therefore oriented myself towards the label.

Return to “NEOSD and NEOSD Pro Discussion”